TEL:+86-532-85831197 / +86-532-85831697

About us | Tires products | Contact us

Common wear of industrial and agricultural tires and ATV

2020·09·03industrial and agricultural tires and ATV

  Industrial and agricultural tires and ATV wear phenomenon, is inevitable in the process of use, because industrial and agricultural tires and ATV and the ground for a long time for friction, so will leave a variety of traces, in general, industrial and agricultural tires and ATV common wear phenomenon mainly have the following several.

  1. Central wear

  The industrial and agricultural tire and ATV tire tread center part wear the remaining tread shoulder part rapidly;The central wear occurs mainly because the pressure of the industrial and agricultural tires and ATV is too high, or in the use of only the rear drive wheel under the circumstances.

  2. Unilateral wear

  Wear of industrial and agricultural tyres and one side of ATV tread quickly;The occurrence of this phenomenon is mainly due to the wheel camber Angle and the misalignment of the front beam.Or in the case of sharp turn frequently in high speed.

Return list

© 2018 QINGDAO QIHANG TYRE CO.,LTD.